Fluke 1AC A1 II Electrical Tester

Fluke 1AC A1 II Electrical Tester

The VoltAlert™ ac voltage testers from Fluke are easy to use-just touch the tip to a terminal strip, outlet, or cord. When the tip glows red, you know there's voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home. The Volt Alert 1AC is for detecting line voltage from 90 to 1000 VAC. 


Features:
- Voltbeat™ technology and continuous self-test – so you always know it's working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V AC to 1000 V AC
- 20 V to 90 V AC control circuit model also available
- Two-year warranty
- Batteries included
- On/Off Button
- Audible/Silent


 Specifications:

Operating

Principles

Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage

Operating Temperature

-10°C to 50°C (-14°F to 122°F)

Voltage sensing

Nominally, 90 V AC to 1000 V AC

Detector tip style

Flat-tip

Light source

One high intensity red LED

Agency Approvals

c CSA us, CE, C-Tick

Safety Rating

1000 V, CAT IV

Safety Compliance

Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2

EMC Compliance

Meets IEC 61326-1:2006

IP Rating

IP 40

Operating Humidity Ranges

0% to 95% (0°C to 30°C)

0% to 75% (30°C to 40°C)

0% to 45% (40 to 55°C)

Operating Altitude

3000 m

Cleaning

Clean with damp cloth

Batteries

2 AAA alkaline batteries included

Battery Life

Typical battery life of greater than 1 year

Warranty Period

One years

 


No Review